--
-- File Name : MyAVR-COMMON-MIB.txt
-- 
-- Copyright (C) 2023, MyAVR.ru Inc. All rights reserved.
--  
-- Description:     This is the MyAVR Common MIB file. It's the root of all MyAVR products MIB OIDs.
--        
-- History: 
--
-- 
-- 

MyAVR-COMMON-MIB	DEFINITIONS ::= BEGIN
--================================================================
-- MyAVR-COMMON-MIB 
--     A private enterprise MIB for MyAVR, Inc.
--================================================================
	IMPORTS
		enterprises, OBJECT-IDENTITY, MODULE-IDENTITY
			FROM SNMPv2-SMI;

	MyAVR	MODULE-IDENTITY
		LAST-UPDATED	"202301161200Z"
		ORGANIZATION	"MyAVR, Inc."
		CONTACT-INFO	"Phone:   +7-926-583-6862 (Russia)
				 E-mail:  info@MyAVR.ru" 

		DESCRIPTION	"This file defines the private enterprise MIB of MyAVR, Inc."
		::=  {  enterprises  59942  }

	ATSController OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "ATSController is the root OBJECT IDENTIFIER from which sysObjectID values are assigned."
		::= { MyAVR 1 }

	Voltage OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "All system voltage"
		::= { ATSController 1 }

	Current OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "The current value."
		::= { Voltage 1 }

	Mains OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Mains voltage"
		::= { Current 1 }

	L1	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L1 current voltage"
		::= { Mains 1 }

	L2	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L2 current voltage"
		::= { Mains 2 }

	L3	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L3 current voltage"
		::= { Mains 3 }

	Generator OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Generator voltage"
		::= { Current 2 }

	G1	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G1 current voltage"
		::= { Generator 1 }

	G2	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G2 current voltage"
		::= { Generator 2 }

	G3	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G3 current voltage"
		::= { Generator 3 }

	Inverter OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Inverter voltage"
		::= { Current 3 }

	InverterV	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Inverter battery voltage"
		::= { Inverter 1 }

	Limits OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Voltage limits."
		::= { Voltage 2 }

	Mains OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Mains voltage limits"
		::= { Limits 1 }

	L1Max	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L1 max limit voltage"
		::= { Mains 1 }

	L2Max	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L2 max limit voltage"
		::= { Mains 2 }

	L3Max	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L3 max limit voltage"
		::= { Mains 3 }

	L1Min	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L1 min limit voltage"
		::= { Mains 4 }

	L2Min	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L2 min limit voltage"
		::= { Mains 5 }

	L3Min	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "L3 min limit voltage"
		::= { Mains 6 }

	Generator OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Genetator voltage limits"
		::= { Limits 2 }

	G1Max	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G1 max limit voltage"
		::= { Generator 1 }

	G2Max	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G2 max limit voltage"
		::= { Generator 2 }

	G3Max	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G3 max limit voltage"
		::= { Generator 3 }

	G1Min	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G1 min limit voltage"
		::= { Generator 4 }

	G2Min	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G2 min limit voltage"
		::= { Generator 5 }

	G3Min	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "G3 min limit voltage"
		::= { Generator 6 }

	Inverter OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Inverter voltage limits"
		::= { Limits 3 }

	VMax	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Inverter max limit voltage"
		::= { Inverter 1 }

	VMin	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Inverter min limit voltage"
		::= { Inverter 2 }

	Frequency OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Frequency"
		::= { ATSController 2 }

	Current OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Current frequency"
		::= { Frequency 1 }

	FreqMains	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Mains frequency"
		::= { Current 1 }

	FreqGenerator	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator frequency"
		::= { Current 2 }

	Limits OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Frequency limits"
		::= { Frequency 2 }

	FreqMainsTolerance	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Mains frequency tolerance"
		::= { Limits 1 }

	FreqGenTolerance	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator frequency tolerance"
		::= { Limits 2 }

	SMU OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Service meter unit"
		::= { ATSController 3 }

	Current OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Current SMU"
		::= { SMU 1 }

	CurrentSMU	OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Current SMU in minutes."
		::= { Current 1 }

	TotalSMU	OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Total SMU in minutes."
		::= { Current 2 }
		
	NumberOfStarts	OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Number of generator starts since the last oil change."
		::= { Current 3 }
		
	TotalStarts	OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Total number of generator starts."
		::= { Current 4 }

	Limits OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Set SMU"
		::= { SMU 2 }

	SetSMU	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Set SMU in minutes."
		::= { Limits 1 }

	Flags OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Flags"
		::= { ATSController 4 }

	PreventiveStart	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "If the reason for starting the generator was a preventive start - this flag will be set."
		::= { Flags 1 }

	AutoManual	OBJECT-TYPE
		SYNTAX	INTEGER {
			Manual mode(0),
			Auto mode(1),
			Eco mode(2)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator start mode. 0 - Manual. 1 - auto. 2 - Eco."
		::= { Flags 2 }

	GeneratorStart	OBJECT-TYPE
		SYNTAX	INTEGER {
			Generator stoped(0),
			Generator run(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator status flag. 1 - running. 0 - stop."
		::= { Flags 3 }
		
	Schedule	OBJECT-TYPE
		SYNTAX	INTEGER {
			Schedule is off(0),
			Schedule is on(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Schedule status flag. 1 - on. 0 - off."
		::= { Flags 4 }
		
	Schedule_stop	OBJECT-TYPE
		SYNTAX	INTEGER {
			Running is possible(0),
			Prohibition of starting(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Prohibition of starting the generator status flag. 1 - stop. 0 - running is possible."
		::= { Flags 5 }

	Errors OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "System errors"
		::= { ATSController 5 }

	Error1	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator emergency stop."
		::= { Errors 1 }

	Error2	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "The incoming voltage from the mains is above the set threshold."
		::= { Errors 2 }

	Error3	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "The incoming voltage from the mains is below the set threshold."
		::= { Errors 3 }

	Error4	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Contactor failure. No voltage at contactor output."
		::= { Errors 4 }

	Error5	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Voltage drop across the contactor."
		::= { Errors 5 }

	Error6	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "OilService. Change the oil in the generator."
		::= { Errors 6 }

	Error7	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Internal error. The power supply is defective."
		::= { Errors 7 }

	Error8	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "The system time has not been set."
		::= { Errors 8 }

	Error9	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Contactor failure. Contactor sticking."
		::= { Errors 9 }

	Error10	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator start error."
		::= { Errors 10 }

	Error11	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Mains phase sequence error."
		::= { Errors 11 }

	Error12	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator phase sequence error."
		::= { Errors 12 }

	Error13	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Error in monitoring three phases of the mains."
		::= { Errors 13 }

	Error14	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Error in monitoring three phases of the generator."
		::= { Errors 14 }

	Error15	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator preventive start error."
		::= { Errors 15 }

	Error16	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Mains frequency out of range."
		::= { Errors 16 }

	Error17	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Generator frequency out of range."
		::= { Errors 17 }

	Error18	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "The incoming voltage from the generator is above the set threshold."
		::= { Errors 18 }

	Error19	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "The incoming voltage from the generator is below the set threshold."
		::= { Errors 19 }

	Error20	OBJECT-TYPE
		SYNTAX	INTEGER {
			Ok(0),
			Error present(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Emergency stop button pressed."
		::= { Errors 20 }
		
	No_error OBJECT-TYPE
		SYNTAX	INTEGER {
			Error present(0),
			No errors(1)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "There are no errors in the device."
		::= { Errors 99 }

	Other OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION "Other"
		::= { ATSController 6 }

	Hysteresis	OBJECT-TYPE
		SYNTAX	INTEGER
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "Voltage hysteresis between limit and actual value."
		::= { Other 1 }

	Contactor	OBJECT-TYPE
		SYNTAX	INTEGER {
			Off(1),
			Mains(2),
			Generator(3)
			}
		MAX-ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION "The current position of the contactor."
		::= { Other 2 }

END